LOCTITE® 222 - Bottle 10.0/case
Features and Benefits
Available sizes:
Threadlocking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies.
LOCTITE® 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.
- Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws
- Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
- Especially suited to small thread sizes
- Permits disassembly with hand tools
- P1 NSF Reg. No.: 123002
Documents and Downloads
Safety Data Sheets and RoHs
- Bottle 10.0/case - IDH 142486
- Bottle 12.0/case - IDH 195743
- Bottle 12.0/case - IDH 267358
LOCTITE® 222, 250 ml Bottle 142486 en-GB
IDH:
142486
EAN:
5010266222721
Size Case: Bottle
Quantity: 10.0/case
LOCTITE® 222, 50 ml Bottle 195743 en-GB
IDH:
195743
EAN:
3255460222340
Size Case: Bottle
Quantity: 12.0/case
LOCTITE® 222, 10 ml Bottle 267358 en-GB
IDH:
267358
EAN:
4058093018118
Size Case: Bottle
Quantity: 12.0/case
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Agency approvals / certificates / specifications | NSF P1 Reg. No 123002 |
| Application method | Dispense system, Manual |
| Application temperature | -55.0 - 150.0 °C (-65.0 - 300.0 °F ) |
| Applications | Threadlocking |
| Breakaway torque, M10 Steel Nuts/Bolts | 6.0 N·m (50.0 in./lb. ) |
| Colour | Purple |
| Cure type | Anaerobic cure |
| Fixture time | 20.0 min. |
| Key characteristics | Disassembly: removable, Fluorescent, General purpose, Mix: no mix required, Strength: low Strength, Thixotropic |
| Physical form | Liquid |
| Prevail torque, M10 Steel Nuts/Bolts | 4.0 N·m (35.0 in./lb. ) |
| Recommended for use with | Metal, Metal: passive metal |
| Viscosity, Speed 20 RPM | 1200.0 mPa·s (cP) |
How to
Step by Step Guide
1. Preparation - Cleaning
It is recommended to use LOCTITE® SF 7063/7064 to degrease and clean surfaces prior to applying adhesive.
2. Preparation - Activation
If cure speed is too slow due to passive metals (stainless steel, aluminium and plated metals) or low temperature (below 5°C), use activator LOCTITE® SF 7240 or LOCTITE® SF 7649 (see cure speed vs activator graph in the TDS).
3. Application
Apply liquid threadlocker to the engagement area. For manual dispensing the use of a peristaltic handgun is recommended to ensure a consistent application volume.
4. Application - Through Hole
Insert bolt and apply threadlocker to the exposed thread. Assemble nut and tighten to the correct/specified torque.
5. Application - Blind Hole
Apply into lower third of blind hole.
6. Assembly
Assemble and tighten. If several bolts are being assembled, torque them down to the correct value within the fixture.
7. Disassembly
Disassemble with standard hand tools.
Hint
For the disassembly of corroded or seized parts use LOCTITE® LB 8040 Freeze and Release.
Where to Buy
Buy Online
LOCTITE® 222
Threadlocking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies.
- Bottle 10.0/case - IDH 142486
- Bottle 12.0/case - IDH 195743
- Bottle 12.0/case - IDH 267358
Buy Nearby
Use our distributor locator to find your nearest store.
* Contact the distributor to confirm that the selected product is in stock.
Go To distributor locatorFrequently Asked Questions
What products can I use to prevent vibration loosening of parts? / How do I prevent vibration loosening and leak paths?
What temperatures can threadlockers / thread sealants / gasketing materials work up to?
Are threadlockers / sealants / gasketing materials resistant to fluids such as petrol, diesel, engine oil, water, glycol, acids, alkalis, hydraulic fluid, etc.?
Which products are food / drinking water approved?
Can threadlockers be used as thread sealants? / Can thread sealants be used as threadlockers?
What health and safety (H&S) precautions do I need to take with product "X"?
LOCTITE® 222
Threadlocking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies.
How to Secure Threaded Assemblies
Threaded assemblies are present in most machines. Learn how they work and how to get your threads secured with LOCTITE®XPLORE, our new e-learning platform for Assembly, Maintenance and Vehicle Repair professionals.
