Contact us
Please fill out the form below and we’ll respond shortly. Or get in touch on Facebook today!
LOCTITE® 545
Features and Benefits
Designed for locking and sealing metal pipes and fittings, this product is specially formulated to offer high lubricity for easy assembly and removal.
For fine threaded fittings, choose LOCTITE® 545. This thread sealant is perfect for small fittings in general, especially as used in hydraulic and pneumatic installations. The medium-viscosity product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration when cured. It's specially formulated to offer lubricity for the easy assembly of hydraulic and pneumatic fittings, and contains no fillers or particles that could contaminate system fluids, foul valves, or clog fine filters and screens.
- High lubricity for easy assembly and removal
- Recommended for fine threads
- Contains no clogging fillers or particles
- ABSSM and CFIA approved
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
| Application method | Dispense system, Manual |
| Applications | Hydraulic/pneumatic sealing, Pipe sealing, Thread sealing |
| Breakaway torque, Steel M10 | 2.0 N·m (20.0 in./lb. ) |
| Color | Purple |
| Cure type | Anaerobic cure |
| Key characteristics | Lubricity: high lubricity, No fillers/particles, Solvent resistant, Viscosity: medium viscosity |
| Operating temperature | -55.0 - 150.0 °C (-65.0 - 300.0 °F ) |
| Physical form | Liquid |
| Recommended for use with | Metal, Thread type: fine |
| Viscosity, 20 RPM | 15000.0 mPa·s (cP) |
How to
Step by Step Guide
1. Preparation
Cleaning - It is recommended to use LOCTITE® SF 7063 or LOCTITE SF 7070 Cleaner & Degreaser to degrease and clean surfaces prior to applying adhesive. Activation - If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperatures (below 5°C), use LOCTITE® SF 7649 activator. Allow to dry.
2. Application
Starting one to two threads from leading edge of pipe, apply a 360° bead to cover three thread roots. For bigger threads, apply both on male and female threads. (Recommended dispensing equipment: LOCTITE® Pro Pump Handheld Dispenser (50ml/250ml) or LOCTITE® Peristaltic Hand Pump.
3. Assembly
Assemble fittings using wrench tightening in accordance with manufacturers' recommendations.
4. Disassembly
Disassemble with standard hand tools. If not possible, apply localized heat to approximately 260°C/500°F and disassemble while hot.
Frequently Asked Questions
What temperatures can threadlockers/thread sealants/gasketing materials work up to?
Are threadlockers/sealants/gasketing materials resistant to gasoline, diesel, engine oil, water, glycol, acids, alkalis, hydraulic fluid, etc.?
Which products can be used on metals/plastics?
What health and safety (H&S) precautions do I need to take with product "X"?
LOCTITE® 545
Designed for locking and sealing metal pipes and fittings, this product is specially formulated to offer high lubricity for easy assembly and removal.