LOCTITE® 243 Blue Medium Strength Threadlocker

Features and Benefits

LOCTITE 243 is a medium strength blue threadlocking adhesive that seals and secures metal nuts and bolts to prevent loosening due to shock and vibration.
LOCTITE® 243 is a general purpose threadlocker that provides a medium strength bond. LOCTITE 243 works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g., motor oils, corrosion prevention oils and cutting fluid.
  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
  • Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
  • Permits disassembly with hand tools for servicing
  • P1 NSF Reg. No.: 123000
Read More

Documents and Downloads

Safety Data Sheets and RoHs
LOCTITE® 243, 250 ml Bottle 1335868 en-NG
IDH: 1335868
EAN: 5010266000800

Size Case: Bottle

Quantity: 10.0/case

LOCTITE® 243, 2 l Bag in Box 1335904 en-NG
IDH: 1335904
EAN: 5010266000848

Size Case: Bag in Box

Quantity: 1.0/case

LOCTITE® 243, 10 ml Bottle 1918246 en-NG
IDH: 1918246
EAN: 5010266009100

Size Case: Bottle

Quantity: 12.0/case

No documents found

Technical Information

Application method Dispense gun, Dispense system, Manual
Application temperature -55.0 - 180.0 °C (-65.0 - 360.0 °F )
Applications Threadlocking
Breakaway torque, M10 Steel Nuts/Bolts ~26.0 N·m (230.0 in./lb. )
Colour Blue
Cure type Anaerobic cure
Fixture time 10.0 min.
Key characteristics Disassembly: removable, Fluorescent, General purpose, Oil tolerant, Primerless, Strength: medium strength, Thixotropic
Physical form Liquid
Prevail torque, M10 Steel Nuts/Bolts 5.0 N·m (40.0 in./lb. )
Recommended for use with Metal, Metal: passive metal
Specific gravity, @ 23.0 °C 1.08
Viscosity, Speed 20 RPM 2150.0 mPa·s (cP)

How to

Step by Step Guide

1. Preparation - Cleaning

It is recommended to use LOCTITE® SF 7063/7064 to degrease and clean surfaces prior to applying adhesive.

2. Preparation - Activation

If cure speed is too slow due to passive metals (stainless steel, aluminium and plated metals) or low temperature (below 5°C), use activator LOCTITE® SF 7240 or LOCTITE® SF 7649 (see cure speed vs activator graph in the TDS).

3. Application

Apply liquid threadlocker to the engagement area. For manual dispensing, the use of a peristaltic handgun or the LOCTITE® Pro Pump is recommended to ensure a consistent application volume.

4. Application - Through Hole

Insert bolt and apply threadlocker to the exposed thread. Assemble nut and tighten to the correct/specified torque.

5. Application - Blind Hole

Apply into lower third of blind hole.

6. Assembly

Assemble and tighten. If several bolts are being assembled, torque them down to the correct value within the fixture.

7. Disassembly - Hand Tools

Disassemble with standard hand tools.

Hint

For the disassembly of corroded or seized parts use LOCTITE® LB 8040 Freeze and Release.

Frequently Asked Questions